Cloud-based CO2 monitoring system for better air quality in COVID-19 situation

A cloud-based CO2 monitoring system was configured by OTM for air quality monitoring in the COVID-19 situation.

Application

The following two documents were followed in this application:

The CO2 level monitored is used as a proxy to justify the ventilation adequacy in the COVID-19 situation:

  • If the CO2 level is above 800 ppm, the ventilation may not be sufficient;
  • If the CO2 level is above 1100 ppm, the ventilation level is insufficient according to Singapore Standard SS554:2016.

Instrument

Delta Ohm HD50 web data logger was used for this application. The model selected was HD50G1NBTV. It has built-in probes for CO2, temperature, and humidity measurement.

The instrument can meet all requirements specified by NEA/BCA. It also automatically uploads the data to Delta Ohm cloud via ethernet or wifi. Shown below are the results displayed in the cloud portal.

The instrument was pre-configured by OTM. The end user just needed to do the last-step mechanical mounting. All authorized users can access the results at the cloud portal with a browser and it is very convenient for facility managers who are busy with many things.

Leave a Reply

Your email address will not be published. Required fields are marked *